- Strong 1000-Watt On-Demand Output for PC and server applications
- Legacy and newest AMD and Intel i7 multi-core CPU supported
- UL certified safety power cord included
- Quiet 140mm fan operated under Smart Fan controller
- Consumes less than 0.5W in standby no load state - EuP Lot 6 2013 compliant
- Energy-efficient with less heat and wastes less electricity
- Active PFC technology with full rang
- Black casing with black cable and black fan
UL certified AC power cord, user manual, and installation screws included
High Efficiency Low Heat Low Noise
This unit can operate anywhere in the world automatically with any AC input voltage from 100V to 240V. The sophisticated high efficiency design allows the unit to operate with less heat and lower cooling fan noise than most PC power supply models in the market.
ATX 12V V2.2 EPS 12V V2.92
Connectors Details
1 x 20+4pin Main Power Connector (supports 20 or 24pin) -20"
1 x 4+4 12V Power Connector (supports standard 2x2 P4 or 2x4 8pin 12V boards) 21"
5 x SATA Power Connector (on two separate line of cables for unrestricted reach) - longest SATA 27.5"
2 x Peripheral Power Connector (on 2 separate line of cables) - longest Molex 27.5"
1 x Floppy Drive Power Connector
2 x 6+2 PCI-E Power Connector, supports 6pin or 8pin PCIe video cards (on 2 separate line of cables for unrestricted reach) - 21.5"
More Details
Better Air Flow Design Large 140mm fan draws massive amounts of hot air in from the CPU into the power supply and exits out the back of the PC. Special slippery circular tube design fan-guard allows air to flow in smoothly and quietly while providing protection against unintended installation injury.
Smart Fan Control Fan speed is regulated in reference to its internal temperature sensor attached to an internal heat-sink fin. Quiet low-friction fan spins leisurely at 800 RPM, reducing power consumption and greatly reducing fan noise. On board smart controller may gradually increase the fan speed in response to rise in temperature.
Plug and Power This is the optional Active FPC auto-switch version that does not come with an AC Voltage Selection Switch as it can now self-select automatically.
Technical Specifications:
|
AC INPUT
|
115V/230V - 60/50Hz
|
||||||
|
DC OUTPUT
|
+3.3V | +5V | +12V1 |
+12V2 | -12V | +5VSB | |
|
1000W
|
Max
Combined Peak Watts |
33A | 45A | 34A |
34A | 0.8A | 3A |
|
1000W
|
|||||||
Manual shut-down rocker switch
Maximum Power Output: 1000W
Efficiency: Typical 78%
Input: 100--240V AC - automatic selection. No need to flip the AC input switch manually.
Dimension: 150mm x 86mm x 140mm (the 140mm length is the side that extends inside the case when installed)
EuP Lot 6 2013 compliant
This unit is designed to consumes less than 0.5 watt in standby no load state. You no longer suffer noticeable power loss even after PC system is powered off.
Right angle (90-degree) serial ATA power connectors spread out in multiple lines of cables to reach various drive positions in tight corner
RoHS Compliant - made with hazardous-free components
RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.
Lead-FREE Cadium-FREE Mercury-FREE Hexavalent Chromium-FREE
PBB-FREE PBDE Flame Retardants-FREE
Complete 4*Startm system protection
Over Voltage Protection
Under Voltage Protection
Short Circuit Protection
Over Power Protection